Loop Keys - NEC Xen Topaz Programming Manual

Program 12 to 15
IN
SA
SB COPY
Description
Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset telephone. Loop Keys can
be incoming, outgoing or both ways. Outgoing Loop Keys use the Data 1 options. Incoming Loop Keys use
the Data 2 option. Both Way Loop Keys use both the Data 1 and Data 2 options.
Input Data
Extension Number
Key Number (KTS with DLS)
Prog. No. Item
15-13-01
Data 1(Outgoing)
Option
15-13-02
Data 2(Incoming)
Option
Default
Programmable Function Key No. : 01-46
Data 1 (Outgoing) Option : 0 (Assigns the Loop Key for ARS)
Data 2 (Incoming) Option : 0 (Assigns the Loop Key to all trunk groups)
Conditions
None
Feature Cross Reference
♦
Loop Key
Telephone Programming Instructions
To enter data for Program 15-13(Loop Keys):
1. Enter the programming mode.
2. Enter 15 13
15-13-01 TEL200
OTG KY01 = 0
3. Enter the number of the item you want to program.
15-13-xx TELxxxx
xxxxx
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
P 15 E
ROGRAM
Input Data
0-25
(0- Assigns the Loop Key for ARS, 1-25- Assigns
the Loop Key to the trunk group specified)
0-25
(0- Assigns the Loop Key to all trunk groups, 1-25-
Assigns the Loop key to the trunk group specified)
Xen Topaz Programming Manual
B
XTENSION ASIC
15-13: L
OOP
Max. 4 digits
01-46
S
ETUP
K
EYS
107