NEC Xen Topaz Programming Manual page 225

IN
SA
SB
Description
Use Program 25-12 : Alternate Trunk Group Routing for DISA to define the trunk route selected when a
DISA caller dials the Alternate Trunk Access Code. The route selected is based on the DISA caller's Class
of Service, which is in turn determined by the password the caller dials. When programming, you make a
separate entry for each Night Service Mode.
Use Program 11-09-02 to set the Alternate Trunk Access Code. Use Program 14-06 to set trunk routes.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
You cannot use Program 21-15 to assign Alternate Trunk Routing to DISA trunks.
Feature Cross Reference
♦
Direct Inward System Access (DISA)
♦
Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 25-12 (Alternate Trunk Group Routing for DISA):
1. Enter the programming mode.
2. Enter 25 12
25-12-01DISA-U1
Mode1 RouteTbl 0
3. Enter the number of the item you want to program.
25-12-xxDISA-Uxx
xxxxx
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
25-12: A
LTERNATE
Route Table Number
0-25 (0 : No setting)
218
P 25: DID/DISA S
ROGRAM
T G R
RUNK ROUP OUTING FOR
1-15
Program 21 to 25
ETUP
DISA
Default
0