Dil Assignment - NEC Xen Topaz Programming Manual

Program 21 to 25
IN
SA
SB
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling Group for
each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring Group
programming. If an extension has a line key, the DIL rings the line key. If the extension does not have a line
key, the DIL rings loop keys (if programmed) or the CALL key (CALL key will always ring). Use Program 22-
02 to designate a trunk as a DIL). You can make eight DIL assignments, one for each Night Service mode:
Input Data
Trunk Port Number
Day/Night Number of Transferring Destina-
Mode
Extension number (Max. 4 digits)
Department Group number (Max.4
1-8
Conditions
None
Feature Cross Reference
♦
Direct Inward Line (DIL)
Telephone Programming Instructions
To enter data for Program 22-07(DIL Assignment):
1. Enter the programming mode.
2. Enter 22 07
22-07-01 Trunk1
Mode1 No =
3. Enter the number of the item you want to program.
22-07-xx Trunkxx
xxxxx
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
tion
digits)
P 22: I
ROGRAM NCOMING
22-07: DIL A
1-51
Default
No setting
Xen Topaz Programming Manual
C S
ALL ETUP
SSIGNMENT
Related Program
22-02
177