Did/Disa Error Message Assignment - NEC Xen Topaz Programming Manual

Program 21 to 25
IN
SA
SB
Description
Use Program 25-05 : DID/DISA Error Message Assignment to assign the VRS message number to be
used as the Automated Attendant error message. For each DID/DISA trunk that the VRS will answer, enter
the VRS message (1-48) the outside caller hears if they dial incorrectly. If you enter 0 (i.e., no error mes-
sage), the call reroutes according to Program 25-03 and 25-04.
For each trunk, you make a separate entry for each Night Service mode.
Input Data
Trunk Port Number
Day/Night
Mode
1-8
0-48 (0 : No setting)
Conditions
None
Feature Cross Reference
♦
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-05 (DID/DISA Error Message Assignment):
1. Enter the programming mode.
2. Enter 25 05
25-05-01TrkPrt1
Mode1 MSG No=0
3. Enter the number of the item you want to program.
25-05-xxTrkPrtxx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
25-05: DID/DISA E
VRS Message Number
P 25: DID/DISA S
ROGRAM
M
RROR ESSAGE
1-51
Default
0
Xen Topaz Programming Manual
ETUP
A
SSIGNMENT
Related Program
209