NEC Xen Topaz Programming Manual page 90

Program 12 to 15
IN
SA
SB COPY
Description
Use Program 14-08 : Music on Hold Source for Trunks to define a trunk's Music on Hold source as ei-
ther the ACI or BGM port.
Note: If ACI is selected as the source in Item 1, the port number for the source must be selected in Item 2.
Input Data
Trunk Port Number
Prog. No. Item
14-08-01
MOH Type
Select a trunk's
Music on Hold
source.
14-08-02
Source Port
Number for
MOH
Conditions
None
Feature Cross Reference
♦
Music on Hold
Telephone Programming Instructions
To enter data for Program 14-08(Music on Hold Source for Trunks):
1. Enter the programming mode.
2. Enter 14 08
14-08-01 Trunk1
MOH Type 1
3. Enter the number of the item you want to program.
14-08-xx Trunkxx
xxxxx
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
14-08: M
0 : Internal synthesized MOH
1 : A customer-provided source connected to BGM port.
2 : A customer-provided source connected to ACI port.
0-6
If the MOH type is "2", the source port number is 0-6.
P 14: T
ROGRAM
H S
USIC ON OLD OURCE FOR
1-51
Input Data
Xen Topaz Programming Manual
B S
RUNK ASIC ETUP
T
RUNKS
Default
0
0
83