NEC Xen Topaz Programming Manual page 164

Program 21 to 25
IN
SA
SB
Input Data (Cont)
Prog. No. Item
21-05-10
Restriction for
group ABB dials
21-05-11
Intercom Call Re-
striction
21-05-12
PBX Call Restric-
tion
21-05-13
Restriction of Tie
call
P
ROGRAM
Input Data
0 : Not re- Use this option to enable/disable Toll
stricted Restriction for Group Abbreviated Di-
1 : Following alling numbers. If enabled, Group Ab-
restriction table breviated Dialling numbers have the
same restrictions as manually dialled
numbers.
0 : Disable It chooses whether ICM incoming call
1 : Enable is
restricted.
0 : Disable Use this option to set how the system
1 : Enable Toll
Restricts calls over PBX trunks. If you
enable PBX Toll Restriction, the sys-
tem begins Toll Restriction after the
PBX access code. The user cannot
dial a PBX extension. If you disable
PBX Toll Restriction, the system only
restricts calls that contain the PBX
access code. The system does not
restrict calls to PBX extensions. Refer
to the PBX compatibility feature. Make
sure Program 21-05-04 (Maximum
Number of Digits Table Assignment)
allows for PBX Toll
Call Dialling (normally 12 digits).
0 : Disable It chooses whether the toll restriction
1 : Enable of the dial set up by 34-08 is enabled
or disabled.
21: O
UTGOING
21-05: T R
OLL ESTRICTION
Description
Xen Topaz Programming Manual
C S
ALL ETUP
C
LASS
Related
Program
34-08
157