Extension Control - NEC Xen Topaz Programming Manual

IN
SA
SB
Description
Use Program 90-07 : Extension Control is used for Extension maintenance.
Input Data
Menu Number
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-07 (Extension Control):
1. Enter the programming mode.
2. Enter 90 07
90-07-01 Menu1
Ext No.
3. Enter the number of the item you want to program.
90-07-xx Menux
xxxxx
4. Select the Menu number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P
ROGRAM
1 : Hardware Reset
2 : Software Reset
Extension Number
Up to 4 digits
314
Program 40 to 92
90: M
AINTENANCE
90-07: E
XTENSION
P
ROGRAM
C
ONTROL