NEC Xen Topaz Programming Manual page 81

Feature Cross Reference
Refer to feature in above chart.
Telephone Programming Instructions
To enter data for Program 14-01(Basic Trunk Data Setup):
1. Enter the programming mode.
2. Enter 14 01
14-01-01 Trunk1
TRK Name-Line 00
3. Enter the number of the item you want to program.
14-01-xx Trunkxx
xxxxx
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual 74
Program 12 to 15