System Options For Single Line Telephones - NEC Xen Topaz Programming Manual

Program 16 to 20
IN
SA
SB
Description
Use Program 20-03 : System Options for Single Line Telephones to set up various options for Single
Line Telephones.
Input Data
Prog.
Item
No.
20-03-01 SLT Call Waiting
Answer Mode
20-03-02 -Not Used-
20-03-03
SLT DTMF Dial to
Trunk Lines
20-03-04
Trunk Call Dial
Sending Time by
SLT
20-03-05 SLT Operation
Mode
20-03-06 Headset Ringing
Cancel Time
Conditions
None
20-03: S O
YSTEM
Input Data
0 : Hook Flash
1 : Hook Flash +
Service code
(894)
-
0 : Receive all
dialled data, be-
fore sending
1 : Direct
through out
0-64800(sec.)
0 : Normal Mode
1 : Extended
Mode1
2 : Extended
Mode2
0-64800(sec.)
P 20: S
ROGRAM YSTEM
S
PTIONS FOR INGLE
Description
For a busy Single Line
Telephone, set the mode
used to answer a
camped-on trunk call.
-
Type 0 : The system
keeps the digits dialled by
the SLT on a trunk in a
buffer. After all the digits
have been received, the
system sends all the dig-
its to the trunk. If the time
space between digits is
longer than the timer in
Item 4, the system
considers all digits re-
ceived.
Type 1 : The system
passes the received dial
from the SLT to the trunk
immediately. If the SLT
has a Last Number Dial
key without a pause, this
key may not be able to
use the Last number
dialling key with the Type
1 setting.
When toll restrictions are
used on SLT ports, the
setting must be Type 0.
Xen Topaz Programming Manual
O S
PTION ETUP
L T
INE ELEPHONES
Related
Default
Program
0 11-12-47
0 20-03-04
3
0
5
117