NEC Xen Topaz Programming Manual page 94

Program 12 to 15
IN
SA
SB COPY
Telephone Programming Instructions
To enter data for Program 15-01(Basic Extension Data Setup):
1. Enter the programming mode.
2. Enter 15 01
15-01-01 TEL
ExtName-EXT 200
3. Enter the number of the item you want to program.
15-01-xx TELxxxx
xxxxx
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section
P 15: E
ROGRAM XTENSION
15-01: B E
ASIC XTENSION
Xen Topaz Programming Manual
B S
ASIC ETUP
D S
ATA ETUP
87