Pre-Amble Message Assignment - NEC Xen Topaz Programming Manual

Program 40 to 92
IN
SA
SB
Description
In Program 40-11 : Pre-Amble Message Assignment to assign the VRS message number to be used as
the Pre-amble Message for each trunk. When the extension user answers the incoming call, the assigned
VRS message will be sent to the outside caller.
Input Data
Trunk Port Number
1-51
Conditions
None
Feature Cross Reference
♦
Voice Response System (VRS)
Telephone Programming Instructions
To enter data for Program 40-11 (Pre-Amble Message Assignment):
1. Enter the programming mode.
2. Enter 40 11
40-11-01 Trunk1
Mode1 Msg No.0
3. Enter the number of the item you want to program.
40-11-xx Trunkxx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
40-11: P
Day/Night Mode VRS Message Number
1-8
P 40: V
ROGRAM
-A M
RE MBLE
0-48(0 : No Service)
Xen Topaz Programming Manual
M S
OICE AIL ETUP
A
ESSAGE SSIGNMENT
Related
Default
Program
0
273