Trunk Group Routing For Trunks - NEC Xen Topaz Programming Manual

IN
SA
COPY
SB
Description
Use Program 21-03 : Trunk Group Routing for Trunks to set the Trunk Route Table for Automatic Exter-
nal Call Forward. The Route Table is set in Program 14-06.
Input Data
Trunk Port Number
Day/ Night Mode
1-8
Conditions
None
Feature Cross Reference
♦
Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 21-03 (Trunk Group Routing for Trunks):
1. Enter the programming mode.
2. Enter 21 03
21-03-01 Trunk1
Mode1=RouteTBL0
3. Enter the number of the item you want to program.
21-03-xx Trunkxx
xxxxx
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P
ROGRAM
21-03: T
Route table number
0-25 ( 0 : No setting)
154
21: O
UTGOING
G R
RUNK ROUP OUTING FOR
1-51
Default
0
Program 21 to 25
C S
ALL ETUP
T
RUNKS
Related Program
14-06
14-01-07