Incoming Virtual Extension Ring Tone Setup - NEC Xen Topaz Programming Manual

IN
SA
SB COPY
Description
Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range (0-4) to
incoming virtual extensions assigned to a Virtual Extension key (Program 15-07). If you enable ringing for
the key in Program 15-09, the key rings with the tone you set in this program. Also see Program 22-03. The
chart below shows the available tones.
Input Data
Extension Number
Incoming Ring Pattern
0 : Tone Pattern 1
1 : Tone Pattern 2
2 : Tone Pattern 3
3 : Tone Pattern 4
4 : Incoming Extension Ring
Tone
Incoming Signal Frequency Pattern
0: Tone Pattern 1
1: Tone Pattern 2
2: Tone Pattern 3
3: Tone Pattern 4
4: Internal Incoming Signal Frequency
Conditions
None.
Feature Cross Reference
♦
Multiple Directory Number/ Call Coverage
Xen Topaz Programming Manual
P
15-08: I
NCOMING
Default
When an extension or a virtual extension is assigned to
the function key on the key telephone, select the ring
0 :
tone when receiving a call on that key.
Tone Pattern
1
100
15: E
ROGRAM XTENSION
V E
IRTUAL XTENSION
Max. 4 digits
Description
Frequency
600/450/16Hz
450/16Hz
600Hz
600/450/16Hz
Program 12 to 15
B S
ASIC ETUP
R T S
ING ONE ETUP
Modulation
FM
AM
-
FM