System Alarm Output - NEC Xen Topaz Programming Manual

IN
SA
SB
Description
Use Program 90-12 : System Alarm Output to set the options for the alarm report. This program has
separate menu options. Define the output port to be used as the output for system alarm report and set the
system alarm options. The system can have up to 50 reports.
Input Data
Prog. No.
Output Port Type
Indicate the type of connection used for the
90-12-01
System Alarms. The baud rate for the COM
port should be set in Program 10-21-02.
90-12-02 -Not Used-
90-12-03 Output All Alarm Reports
90-12-04
Printout New Alarm Reports
90-12-05
Clear All Alarm Reports
90-12-06 Output Mode
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-12 (System Alarm Output):
1. Enter the programming mode.
2. Enter 90 12
90-12-01
Output Type 0
3. Enter the number of the item you want to program.
90-12-xx
xxxxx
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P
ROGRAM
Item
322
Program 40 to 92
90: M
AINTENANCE
90-12: S
YSTEM
Input Data
0 : No setting
1 : COM Port (EXIFU)
-
Print All? (Yes : 1)
Print New? (Yes: 1)
All Clear? (Yes : 1)
0 : Manual
1 : Auto
P
ROGRAM
A O
LARM UTPUT
6
Default
0
-
-
-
-
0