Dial Block Release - NEC Xen Topaz Programming Manual

IN
SA
SB
Description
When the extension number is entered in Program 90-19 : Dial Block Release, the extension will be re-
leased from the Dial Block restriction.
Input Data
Extension Number
Conditions
None
Feature Cross Reference
♦
Toll Restriction
Telephone Programming Instructions
To enter data for Program 90-19 (Dial Block Release)
1. Enter the programming mode.
2. Enter 90 19
90-19-01 TELxxx
CLR Dial Block
3. Enter the number of the item you want to program.
90-19-xx TELxxxx
xxxxx
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P
Input Data
[CLR Dial Block] : Dial 1 and press HOLD key
(Press only HOLD key for cancel)
326
90: M
ROGRAM AINTENANCE
90-19: D
Up to 4 digits
Program 40 to 92
P
ROGRAM
B R
IAL LOCK ELEASE