Yamaha Professional Audio
4.3
Faders
Each fader has its channel number displayed on its cap. The fader cap must
be touched to allow the level to be adjusted. When a fader cap is touched, its
background will lighten and its current dB value will be displayed. Using the
iPad's multi-touch facility, up to eight faders can be moved simultaneously.
Note: "Multitasking Gestures" must be turned Off in the iPad in order to allow
four or more faders to be adjusted simultaneously (refer to
4.3.1 Long Faders
Press the [LONG FADERS] button at the bottom-left corner of the Mixer
window to allow more accurate adjustment of fader levels. In this view,
EQ, Pan, Dynamics and the "Navigation/Meter Bridge" are not visible.
4.3.2 Navigation in Long Faders Mode
Although the "Navigation/Meter Bridge" is not visible in Long Faders
mode, it is possible to navigate up or down in banks of 8 channels
using the left/right arrow buttons in the upper left area of the Mixer
window.
Press the [LONG FADERS] button in the bottom-left corner again to
return to the Mixer Overview.
4.4
Channel ON
Press [ON] to change the on/off status of the channel. The button is green
when the channel is on. When a channel is off, its name and level meter will
dim and its fader position shown in the "Navigation/Meter Bridge" will also dim.
If a channel is muted as part of a Mute Group, the ON button will blink.
M7CL StageMix V5 User Guide
10.7
for details).
Page 13