Setting Image Acquisition Conditions; Setting Image Acquisition Conditions Adjusting Light Intensity And Shutter Speed; Adjusting Light Intensity And Shutter Speed - Omron ZFV-C User Manual

Section 5

Setting Image Acquisition Conditions

Setting Image Acquisition Conditions

Adjusting Light Intensity and Shutter Speed

The intensity of the light from Sensor Head and shutter speed can be adjusted. [AUTO] is
selected as the default setting.
MENU mode-[IMAGE]-[CONTRAST]
Setting
AUTO (default)
FIX LIGHT
SHUTTER
(default)
■ Lighting
The light intensity is displayed as a 4-digit number. One digit shows the light intensity
for one of four sides is displayed as a 4-digit number.
View
from here
A
D
1.
Select the light intensity by the UP/DOWN keys.
For partial adjustment
• LEFT/RIGHT keys: Select the side that is adjusted.
• UP/DOWN keys:
2.
Press the SET Key to fix the setting.
ZFV-C
94
User's Manual
Light intensity and shutter speed are adjusted automatically.
The light intensity can be set for each side. 0: Out, 1 to 5: Light intensity
increases according to the number. (0 to 5, default: 5)
This menu is not displayed if ZFV-SC150/SC150W is connected.
1/500, 1/1000, 1/1200, 1/1400, 1/1500, 1/2000, 1/2500, 1/3000, 1/4000, 1/8000
("1/500" can be set only when the light intensity is set to "0000".)
Top surface (model printed surface)
An image of how light is emitted is displayed on screen.
IMAGE/LIGHT
B
C
LIGHT 5555
Select the light intensity.
Details
A
5 5 5 5
The light intensity can also be adjusted
partially (A to D).
A B C D
B
C
D
IMAGE/LIGHT
LIGHT 5555