Installation Procedure - Omron ZFV-C User Manual

● Installation procedure
1.
Hook the connector end of the Amplifier
Unit onto the DIN track.
2.
Push the Amplifier Unit down onto the
DIN track until the hook on the I/O cable
side is locked.
Push down until you hear it snap into
place.
Always hook the connector end of the Amplifier Unit on the DIN track first. Hooking the I/O cable end
on the DIN track first may impair the mounting strength of the DIN track attachment.
● Removal procedure
The following describes how to remove the Amplifier Unit from the DIN track.
1.
Pull the hook on the I/O cable end of the
Amplifier Unit downwards.
2.
Lift up the Amplifier Unit from the I/O
cable end, and remove it from the DIN
track.
Section 2
Amplifier Unit
Hook on connector
end
Hook on I/O cable
end
Hook on I/O cable
end
ZFV-C
33
User's Manual