Editor's Note; Page Format; User's Manual - Omron ZFV-C User Manual

Editor's Note

Page Format

Setting Bank Related Conditions
ZFV-C can hold up to eight sets of settings. These settings can be switched externally
when changing the device setup. A set of these settings is called a "bank".
Setting the Bank Switching Method
Select how to switch banks.
MENU mode-[SYS1]-[BANK SET]-[SWITCH]
Setting
KEY (default) Banks are switched by the control keys on Amplifier Unit.
I/O Banks are switched by the control keys on Amplifier Unit and by external sig-
nals.
Switching by external signals is enabled only in the RUN mode.
Switching to Another Bank p.58
To switch the bank using a command via USB/RS-232C, select [SWITCH]-[KEY].
Copying banks
Copy the settings of other bank numbers to an already selected bank number.
The following example shows the procedure for copying the settings of BANK 1 to BANK 2.
MENU mode-[SYS1]-[BANK SET]-[COPY]
Clearing Banks
"Clearing" deletes the settings of the currently selected bank number.
MENU mode-[SYS1]-[BANK SET]-[CLEAR]
[SYS1], [SYS2] settings and RUN mode display settings will not be cleared.
Supplementary Explanation
Helpful information regarding operation and reference
pages are introduced here using symbols.
Section 5
Setting Bank Related Conditions
Description
ZFV-C

User's Manual

*This page has been made purely for explanatory purposes and does not exist.
Precautions for Correct Use
Title of each section
Header
Overview
Cross-header
Overview of the
cross-header
Index label
Indicates the section
number and title.
Explanation of options
Movement through menus
up to setting items
55
Introduction
ZFV-C
9
User's Manual