Setting Conditions Related To Bank; Copying Banks - Omron ZFV-C User Manual

Section 5

Setting Conditions Related to Bank

Setting Conditions Related to Bank

ZFV-C can hold up to eight sets of settings. These settings can be switched according to
inspection conditions. A set of these settings is called a "bank".

Copying Banks

Copy the settings of one bank to another bank.
The following example shows the procedure for copying the settings of BANK 1 to BANK 2.
MENU mode-[SYS1]-[BANK SET]-[COPY]
1.
Make the settings that are required to perform inspection at BANK 1 (copy
source).
2.
Switch to MENU mode.
3.
Select
4.
Select [2. BANK2] and press the SET key.
5.
Select
6.
Select
[1. BANK1] (copy source).
Press the ESC Key twice to return to
MENU mode.
7.
Switch to RUN mode and save the settings.
ZFV-C
96
User's Manual
and press the SET key.
and press the SET key.
[1. BANKSET] -
ADJ
MENU
MENU
BANK
BANK
1.BANK1
2.BANK2
3.BANK3
4.BANK4
5.BANK5
6.BANK6
7.BANK7
8.BANK8
MENU
SYSTEM 1
[1. COPY] -
SYSTEM 1
1.BANK SET
2.SPEED
3.MEAS TYPE
4.TCH TYPE
5.DISP COL
6.ECO MODE
RUN