Omron ZFV-C User Manual page 146

Section 6
Updating the Firmware
Setting the Firmware Information
4.
Click the [Controller information] button
if necessary.
The model and version number of the cur-
rently connected Amplifier Unit will be dis-
played.
5.
Click the [Loading file] button to select
the file to be written.
The Amplifier Unit model and version num-
ber registered in the file will be displayed.
Performing Firmware Update
6.
Click the [Start upgrade] button in the
[WarpEngineZS] window.
A message indicating that update is about
to start will be displayed.
ZFV-C
144
User's Manual
If a message "Different model" appears when
the [Start upgrade] button is clicked, the cur-
rently connected Amplifier Unit does not
match the model information registered in the
file. In this case, never perform update. Doing
so will damage the Amplifier Unit, disabling its
ability to start up correctly any more.