Sensor Head
This section describes how to install and connect the Sensor Head.
Installing the Mounting Fixture
Attach the mounting fixture (provided with the Smart Sensor) to the side of the Sensor
Head.
No mounting fixture is needed for the ZFV-SC150_ sensor heads as they come with built-in mounts.
■ For ZFV-SC10/-SC10W/-SC50/-SC50W/-SC90/-SC90W
● Installation procedure
The mounting fixture can be installed on all of the four mounting surfaces.
1.
Align the two hooks on one side of the
mounting fixture with the two grooves on
the Sensor Head body (light emitting
side).
2.
Push the other hook.
Push down until you hear it snap into
place.
3.
Make sure that the mounting fixture is
firmly fixed on the Sensor Head.
Mounting fixture
Section 2
Sensor Head
Grooves
Hook
ZFV-C
User's Manual
45