Starting/Cancelling The Lock Function; Lock Function During Gang-Mounting - Omron ZFV-C User Manual

Section 5
Restricting Operations (Lock Function)

Starting/Cancelling the Lock Function

Set the [PASS NUMBER] required for cancelling the lock function before starting the func-
tion.
■ Starting
1.
In the RUN mode, press the ESC key for at least two seconds.
A start confirmation message will appear.
2.
Select [EXECUTE].
The lock function is started.
A key mark is displayed in the upper-right corner of the screen while the lock func-
tion is ON (see the illustration).
■ Cancelling
1.
Switch to the RUN mode and press the ESC key for at least two seconds.
A cancel confirmation message will appear.
2.
Select [EXECUTE].
The pass number input screen will appear.
3.
Input the pass number.
The lock function is cancelled.

Lock Function during Gang-Mounting

During gang-mounting, the lock function can be started or cancelled only on the host
device. With respect to this function, the client is in the same status as the host device.
ZFV-C
108
User's Manual
The start confirmation message will not appear unless an item to be restricted is set.
Key mark
SEARCH OK