Changing The Image Display Position (Partial Function); Increasing The Sensor Head Sensitivity - Omron ZFV-C User Manual

Changing the Image Display Position (Partial Function)

ZFV-C allows you to increase the processing speed by narrowing the image acquisition
area. The image area can be moved, when measurement speed is FAST mode (1/2
screen) or MAX mode (1/4 screen).
Changing the Measurement Speed p.98
The center of the image is
selected just after the mea-
surement speed is
changed.
MENU mode-[IMAGE]-[DISP POS]
1.
Move the image area using the UP/DOWN
keys.
2.
Press the SET Key to fix the setting.

Increasing the Sensor Head Sensitivity

If the image brightness cannot be increased by either shutter speed or lighting setting,
increase the sensitivity magnification.
MENU mode-[IMAGE]-[GAIN]
Setting value (magnification)
X1.0
X1.5
X2.0
Setting Image Acquisition Conditions
Quality
Good (small amount of noise)
↑
↓
Bad (larger amount of noise)
Section 5
Can be moved to the
desired position vertically.
IMAGE/DISP POS
MOVE
Image
Dark
↑
↓
Bright
User's Manual
ZFV-C
95