Switching The Display Content - Omron ZFV-C User Manual

Section 3

Switching the Display Content

Switching the Display Content
Display contents on the LCD monitor can be changed in the RUN mode. Content is
switched in the following order each time the TEACH/VIEW key is pressed. Display the
measured values suitable for your application.
The measurement time differs according to the type of display image. The measurement time for "only
image display" is the fastest. The number in parentheses ( ) serves as a guideline when "only image dis-
play" is taken as the reference.
When the image is switched during measurement, the measurement time changes. For this reason,
monitor the ENABLE signal, wait for the ENABLE signal to turn ON, and then input the TRIG signal.
● Only image
display
● Measurement
result (*3)
SEARCH OK
JG : OK
SCORE : 98
TH : 60
AVE : 0
DRANGE : 0-100
MCONT : 2
NG% : 1.000
TIME : 144
(image only display + 240 ms)
(*1) In the case of [BRIGHT], the display can be switched (average density value, density distribution value)
by the LEFT/RIGHT keys.
(*2) The control bar shows the measurement result and judgment threshold value.
(*3) The measurement time (TIME) indicated here is the shortest measurement time in "only image display".
In the displays showing an image, the image type (color/monochrome) is switched each time the [A]
function key is pressed.
ZFV-C
54
User's Manual
● Judgment result
SEARCH OK
(image only display + 9 ms)
● Enlargement of mea-
surement result and
control bar (*2)
SEARCH OK
JG
:
:
SCORE
(image only display + 95 ms)
● Teaching area
SEARCH OK
+
(image only display + 26 ms)
● Teaching area and
control bar (*2)
SEARCH OK
+
98
(image only display + 60 ms)
● Teaching area
and Measure-
ment result (*1)
SEARCH OK
+
SCORE : 98
TH : 60
(image only display + 60 ms)