Changing Output Signal Output Conditions; Changing Output Signal Output Conditions Selecting The On Conditions; One-Shot Output - Omron ZFV-C User Manual

Changing OUTPUT Signal Output Conditions

Selecting the ON Conditions
Set whether to turn the OUTPUT signal ON when OK is judged or when NG is judged.
MENU mode-[SYS2]-[OUTPUT]-[ON STATUS]
Setting
OK ON
NG ON (default)

One-shot Output

OUTPUT turns ON for only the preset output time from when the OUTPUT signal turns
ON.
● Synchronous measurement
OFF
TRG
ON
OFF
OUTPUT
ON
● Continuous measurement
OUTPUT ON at OK judgment
Judgment NG
OFF
OUTPUT
ON
Changing OUTPUT Signal Output Conditions
Turns the OUTPUT signal ON when OK is judged.
Turns the OUTPUT signal ON when NG is judged.
Measurement
Judgment OK
Output time
Details
Output time
Judgment NG
Section 5
ZFV-C
109
User's Manual