Omron ZFV-C User Manual page 48

Section 2
Sensor Head
● Removing a mounting fixture
Insert a screwdriver into the gap (one of the two gaps) between the mounting fixture
and the Sensor Head case, and remove the mounting fixture.
■ For ZFV-SC10R/-SC50R/-SC90R
1.
Line up the projection on the base
(black) for the mouinting fixture with the
groove on the camera body to attach.
2.
Line up the bracket (silver) on the fixing
jig with the base to attach it to the cam-
era body.
3.
Secure the base and bracket in place
using the included screws (M3×6).
Tightening torque: 0.54 N·m
4.
Secure the base in its mounted position
using screws.
Tightening torque
M4: 1.2 N·m
1/4"-20 UNC: 2.6 N·m
ZFV-C
46
User's Manual
Mounting fixture
Bracket
Base