Inspecting By Count (Count); Basic Setting Procedure - Omron ZFV-C User Manual

Inspecting by Count (COUNT)

Select this item when counting the number of workpieces. The edges in the
teaching area are detected, and judgment is performed by comparing the num-
ber of edges with a reference value. This item is suitable for applications such as
inspecting the number of cookies in a box, checking the number of leads and
counting cables.
Example: Checking the number of lead
OK
COUNT OK
NG due to the num-
COUNT NG
ber of lead is few

Basic Setting Procedure

■ Teaching
Enclose the area to be inspected using a rectangular box and then perform teaching.
A change in brightness such as "light to dark to light" or "dark to light to dark" is counted as "1".
In the above example, the count is 5.
Inspection
Teaching
area setting
COUNT OK
Section 4

Inspecting by Count (COUNT)

User's Manual
ZFV-C
79