Selecting the Measurement Timing
Set the timing that measurement is executed.
MENU mode-[SYS1]-[MEAS TYPE]
Setting
TRIG (default)
CONTINUE
Selecting the Teaching Mode from an External Device
There are two teaching modes from an external device.
MENU mode-[SYS1]-[TEACH TYPE]
Setting
STATIONARY (default)
MOVING
Timing Charts p.42
Setting Screen Display
The color of characters displayed on the LCD monitor and monitor's background color can
be changed. Change the color when it is difficult to see the character or figure on the
image.
• Areas whose color can be changed
SEARCH
OK
+
MENU mode -[SYS1]-[DISP COL]
OK
GREEN (default), RED, YELLOW, BLUE, WHITE
NG
GREEN, RED (default), YELLOW, BLUE, WHITE
NORMAL
GREEN, RED, YELLOW, BLUE, WHITE (default)
BACK
GREEN, RED, YELLOW, BLUE (default), WHITE, BLACK
Synchronous measurement
Measurement is performed in synchronous with the change in state of the exter-
nal TRIG signal from OFF to ON.
Continuous measurement
Measurement is repeatedly performed for the duration that the TRIG signal is ON.
Teaching is performed with the workpiece in a stationary state. Input of the
external trigger is required for teaching.
The teaching is performed with the moving workpiece.
Select this teaching mode only when the workpiece cannot be stopped.
Input of the external trigger is required for teaching.
OK/NG
SYS1/DISP COL
1.OK
2.NG
3.DISP NRML
4.DISP BACK
Setting the System Environment
Details
Details
NORMAL
BACK
NORMAL (color of characters)
Setting
Section 5
ZFV-C
99
User's Manual