Inspecting For The Presence Of Electronic Components (Pattern) - Omron ZFV-C User Manual

Section 7

Inspecting for the Presence of Electronic Components (Pattern)

Inspecting for the Presence of Electronic Components (Pattern)
Adjusting the Camera
1.
Adjust the camera so that the workpiece is displayed on the monitor.
Setting the Inspection Method
2.
Select
3.
Select [ITEM] and press the SET Key.
4.
Select
5.
Select
ZFV-C
152
User's Manual
OK
SEARCH OK
ABCDE
If the workpiece is placed
SEARCH
NG
upside down, NG judg-
ment will be made since
" " is not detected inside
the teaching area.
NG judgment will also be
SEARCH NG
made if the workpiece
contained in a case is
placed upside down.
Adjusting the Sensor Head Focus p.49
and press the SET Key.
and press the SET Key.
and press the SET Key.
MENU
TEACH/SEARCH
ITEM REG.
TEACH/ITEM
PATTERN
TEACH/PATTERN