Appendix 2 Port Mapping - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-R410). The settings vary depending on different
models of routers.
Steps:
1. Select the WAN Connection Type, as shown below:
2. Set the LAN parameters of the router as in the following figure, including IP address and subnet
mask settings.
3. Set the port mapping in the virtual severs of Forwarding. You need to forward ports 80, 8000,
8200~8210 and 554 for a speed dome.
 You can change 80, 8000 and 554 ports value in the speed dome with web browser or client software.
 In the speed dome, the 8200~8210 ports change with the 8000 port with a constant value of 200. E.g. if
the 8000 port is changed to 8005, then the 8200~8210 ports should be changed to 8205~8215.
Example:
© Hikvision
Figure A.2.1 Select the WAN Connection Type
Figure A.2.2 Set the LAN parameters
117