Image Enhancement; Video Adjustment - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome
This function varies depending on the models of speed dome.

Image Enhancement

 Digital Noise Reduction
The digital noise reduce function processes the noise in the video signal.
You can set Digital Noise Reduction function to ON and adjust the Noise Reduction
Level as shown in Figure 6-40. The level ranges from 0 to 100.
This function varies depending on the models of speed dome.
 Defog Mode
When there is fog in the image, you can enable this function to get clear image.
 EIS
The live view image would be trembled and dim when the camera is shocked slightly
in some monitoring conditions. And the electronic image stabilization (EIS) function is
used to overcome this problem to ensure a steady and clear image.
 Chroma Suppress
The Chroma Suppress level ranges from 0 to 100 as shown in Figure 6-41.
This function varies depending on the models of speed dome.

Video Adjustment

 Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in
the mirror. The flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER.
This function varies depending on the models of speed dome.
 Video Standard
You can set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video
system in your country.
© Hikvision
Figure 6-40 Digital Noise Reduction
Figure 6-41 Chroma Suppress
71