Recording And Capturing Pictures Manually; Operating Ptz Control; Ptz Control Panel - HIKVISION Network Speed Dome User Manual

25
User Manual of Network Speed Dome
Please refer to the following sections for more information:
 Configuring remote recording in Section 7.3 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 6.1 Configuring Local
Parameters and Section 6.4.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.5.2 Configuring OSD Settings.

4.4 Recording and Capturing Pictures Manually

In the live view interface, click on the toolbar to capture the live pictures and
the captured image will be saved as a JPEG file in your computer by default.
You can click to record the live video.
The local saving paths of the captured pictures and clips can be set in the
Configuration > Local Configuration interface and the image format can also be
edited in that interface.
To configure remote automatic recording, please refer to Section 7.3 Configuring
Recording Schedule.

4.5 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to control panning,
tilting and zooming.

4.5.1 PTZ Control Panel

On the live view page, click to show the PTZ control panel or click to
hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
Figure 4-4 PTZ Control Panel
© Hikvision