HIKVISION IR Network Speed Dome User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. IR Network Speed Dome
  6. User manual

HIKVISION IR Network Speed Dome User Manual

Ir network speed dome
Hide thumbs Also See for IR Network Speed Dome:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
IR Network Speed Dome

User Manual

V4.2.4
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IR Network Speed Dome and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION IR Network Speed Dome

Summary of Contents for HIKVISION IR Network Speed Dome

  • Page 1: User Manual

    IR Network Speed Dome User Manual V4.2.4 Hangzhou Hikvision Digital Technology Co., Ltd. http://www.hikvision.com...
  • Page 2 Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.” © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 3: Regulatory Information

    The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 4: Safety Instruction

     If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the product yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 5  Please use a soft and dry cloth when clean inside and outside surfaces of the product cover. Do not use alkaline detergents.  Improper use or replacement of the battery may result in hazard of explosion. Please use the manufacturer recommended battery type. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 6: Table Of Contents

    Configuring Privacy Mask ......................38 Clearing PTZ Configurations ......................39 Chapter 6 Speed Dome Configuration ................. 40 Configuring Local Parameters ..................... 40 Configuring Time Settings ......................41 Configuring Network Settings ..................... 44 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 7 Rebooting the Speed Dome ....................94 10.4.2 Restoring Default Settings ....................94 10.4.3 Importing/Exporting Configuration File ................95 10.4.4 Upgrading the System ......................95 10.5 RS-485 Settings ..........................97 Appendix ..........................98 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 8 User Manual of Network Speed Dome Appendix 1 SADP Software Introduction....................98 Appendix 2 Port Mapping........................100 © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 9: Chapter 1 Overview

     IR light MTBF reaching up to 30,000 hours System function:  High performance sensor with mega-pixel resolution  ±0.1° Preset Accuracy  ONVIF(Open Network Video Interface Forum), CGI(Common Gateway Interface), PSIA(Physical Security Interoperability Alliance), to ensure greater © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 10: Functions

     Presets A preset is a predefined image position. When the preset is called, the dome will automatically move to the defined position. The presets can be added, modified, deleted and called. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 11  Wide Dynamic Range (WDR) The wide dynamic range (WDR) function helps the camera provide clear images even under back light circumstances. When there are both very bright and very dark areas © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 12 Comparing with the general 2D digital noise reduction, the 3D digital noise reduction function processes the noise between two frames besides processing the noise in one frame. The noise will be much less and the video will be clearer. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 13: Chapter 2 Network Connection

    Figure 2-1.  Refer to the Figure 2-2 to set the network speed dome over the LAN via a switch or a router. Network Cable Figure 2-1 Connecting Directly © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 14: Detecting And Changing The Ip Address

     For accessing the network speed dome from different subnets, please set the gateway for the network speed dome after you logged in. For detailed information, please refer to Section 6.3.1 Configuring TCP/IP Settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 15: Setting The Network Speed Dome Over The Wan

    Note: Refer to Appendix 2 for detailed information about port mapping. 5. Visit the network speed dome through a web browser or the client software over the internet. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 16: Dynamic Ip Connection

    5. Apply a domain name from a domain name provider. 6. Configure the DDNS settings in the setting interface of the router. 7. Visit the speed dome via the applied domain name. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 17 2. Configure the DDNS settings in the DDNS Settings interface of the network speed dome. Refer to Section 6.3.4 Configuring DDNS Settings for detailed configuration. 3. Visit the speed dome via the applied domain name.  Private Domain Name Resolution © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 18 2. Access the network speed dome through the LAN with a web browser or the client software. 3. Enable DDNS and select IP Server as the protocol type. Refer to Section 6.3.4 Configuring DDNS Settings for detailed configuration. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 19: Chapter 3 Access To The Network Speed Dome

    The default user name is admin, password is 12345. Figure 3-1 Login Interface 4. Install the plug-in before viewing the live video and operating the speed dome. Please follow the installation prompts to install the plug-in. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 20 User Manual of Network Speed Dome Figure 3-2 Download and Install Plug-in Figure 3-3 Install Plug-in (1) Figure 3-4 Install Plug-in (2) © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 21: Accessing By Client Software

    Follow the installation prompts to install the client software and WinPcap. The control panel and live view interface of client software are shown as bellow. Figure 3-6 iVMS-4200 Control Panel © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 22  For detailed information about client software of our company, please refer to the user manual of the software. This manual mainly introduces accessing to the network speed dome by web browser. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 23: Chapter 4 Live View

    Log in the network speed dome to enter the live view page, or you can click on the menu bar of the main page to enter the live view page. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 24: Starting Live View

    Configure the image size and stream type of the live video. 4.3 Starting Live View In the live view window as shown in Figure 4-3, click on the toolbar to start the live view of the speed dome. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 25 3D Positioning: Steps: Click on the tool bar of live view interface. Operate the 3D positioning function:  Left click a position of the live video. The corresponding position will be © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 26: Recording And Capturing Pictures Manually

    On the live view page, click to show the PTZ control panel or click hide it. Click the direction buttons to control the pan/tilt movements. Click the zoom/iris/focus buttons to realize lens control. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 27: Setting / Calling A Preset

    2. Use the PTZ control buttons to move the lens to the desired position. • Pan the speed dome to the right or left. • Tilt the speed dome up or down. • Zoom in or out. • Refocus the lens. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 28 Call patrol 6 Call pattern 4 Call patrol 7 Start to set limit stops Call patrol 8 Note: You may need to use the OSD(On Screen Display) menu when controlling the © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 29: Setting / Calling A Patrol

    Patrol Speed It is the speed of moving from one preset to another. 5. Click to save a preset into the patrol. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 30: Setting / Calling A Pattern

    A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on the pattern settings interface. There are up to 4 patterns for customizing.  Setting a Pattern: Steps: © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 31 Start to record a pattern. Stop recording a pattern. Call the current pattern. Stop the current pattern. Delete the current pattern. Notes: These 4 patterns can be operated separately and with no priority level.  © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 32: Configuring Live View Parameters

     Image Size: You can scale up/down the live view image by clicking . the image size can be 4:3, 16:9, original or auto. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 33: Chapter 5 Ptz Configuration

    3. Click Set to save the position. Call/delete an Initial Position:  You can click to call the initial position. You can click delete the initial position and restore the factory default initial position. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 34: Configuring Basic Ptz Parameters

     Auto Scan Speed: The dome provides 5 scan modes: auto scan, tilt scan, frame scan, random scan and panorama scan. The scan speed can be set from level 1 to 40. PTZ OSD: Set the on-screen display duration of the PTZ status.  © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 35: Configuring Ptz Limit Stops

    The dome can be programmed to move within the configurable limit stops (left/right, up/down). Steps: 1. Enter the Limit Configuration interface: Configuration > Advanced Configuration > PTZ > Limit Figure 5-3 Configure the PTZ Limit © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 36: Configuring Scheduled Tasks

    Figure 5-4 Configure Scheduled Tasks 2. Check the checkbox of Enable Scheduled Task. 3. Set the Park Time. You can set the park time (a period of inactivity) before the dome starts the scheduled tasks. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 37 Start Time and End Time for each task, and click Enter on your keyboard to enter the time. (4) Choose the task type from the drop-down list. You can choose scan, preset, pattern and etc. Figure 5-6 Task Types © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 38: Configuring Park Actions

    3. Set the Park Time as the inactivity time of the dome before it starts the park actions. 4. Choose Action Type the from the drop-down list. Figure 5-8 Action Types 5. Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 39: Configuring Privacy Mask

    6. Click to save the privacy mask, and it will be listed in the Privacy Mask List area; you can select a mask and click to delete it from the list; © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 40: Clearing Ptz Configurations

    1. Enter the Clearing Configuration interface: Configuration > Advanced Configuration> PTZ > Clear Config 2. Check the checkbox of the items you want to clear. 3. Click to clear the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 41: Chapter 6 Speed Dome Configuration

    HTTP: Allows the same quality as of TCP without setting specific ports for streaming under some network environments. MULTICAST: It’s recommended to select the protocol type to when using the Multicast function. For other information about Multicast, © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 42: Configuring Time Settings

    Network Time Protocol(NTP) server and manual mode. To enter the Time Settings interface: Configuration > Basic Configuration > System > Time Settings Or Configuration > Advanced Configuration > System > Time Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 43 Time Center (IP Address: 210.72.145.44). If the speed dome is set in a customized network, NTP software can be used to establish a NTP server for time synchronization.  Configuring Time Synchronization Manually (1) Check the Manual Time Sync. checkbox. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 44 (1) Enter the DST interface by Configuration > Advanced Configuration > System > DST (2) Check to enable the DST function. (3) Set the date of the DST period. (4) Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 45: Configuring Network Settings

    TCP/IP settings must be properly configured before you operate the speed dome over network. Steps: 1. Enter TCP/IP Settings interface: Configuration > Basic Configuration > Network > TCP/IP Or Configuration > Advanced Configuration > Network > TCP/IP Figure 6-7 TCP/IP Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 46: Configuring Port Settings

    Network (WAN), you need to forward the 3 ports for the speed dome. Steps: 1. Enter the Port Settings interface: Configuration > Basic Configuration > Network > Port Or Configuration > Advanced Configuration > Network > Port Figure 6-9 Port Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 47: Configuring Pppoe Settings

    If your speed dome is set to use PPPoE as its default network connection, you can use the Dynamic DNS (DDNS) for network access. Before you start: Registration on the DDNS server is required before configuring the DDNS settings of the speed dome. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 48 (2) In the Domain text field, enter the domain name obtained from the DynDNS website. (3) Enter the Port of DynDNS server. (4) Enter the User Name and Password registered on the DynDNS website. (5) Click to save the settings. Figure 6-12 DynDNS Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 49: Configuring Snmp Settings

    HiDDNS server. (3) Click to save the settings. Figure 6-14 HiDDNS Settings 6.3.5 Configuring SNMP Settings Purpose: You can use SNMP to get speed dome status and parameters related information. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 50 Steps: 1. Enter the SNMP Settings interface: Configuration > Advanced Configuration > Network > SNMP Figure 6-15 SNMP Settings 2. Check the corresponding version checkbox ( ) to enable the feature. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 51: Configuring 802.1X Settings

     server(RADIUS server). The switch forwar ds the certificate of authentication server to the network  camera. If all the information is validated, the switch allows the network access to  © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 52: Configuring Qos Settings

    QoS (Quality of Service) can help solve the network delay and network congestion by configuring the priority of data sending. Steps: 1. Enter the QoS Settings interface: Configuration >Advanced Configuration > Network > QoS Figure 6-18 QoS Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 53: Configuring Ftp Settings

     Root directory: The files will be saved in the root of FTP server.  Parent directory: The files will be saved in a folder in FTP server. The © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 54: Configuring Upnp Settings

    2. Add a Friendly Name and check the Enable Port Mapping checkbox. 3. Select the Port Mapping Mode as Auto or Manual. 4. If in Manual mode, you can check the checkbox of HTTP, RTSP or SDK port according to your demand. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 55: Configuring Video And Audio Settings

    1. Enter the Video Settings interface: Configuration >Basic Configuration > Video / Audio > Video Or Configuration > Advanced Configuration > Video / Audio > Video Figure 6-23 Configure Video Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 56: Configuring Audio Settings

    6.4.2 Configuring Audio Settings Steps: 1. Enter the Audio Settings interface Configuration > Basic Configuration > Video / Audio > Audio Or Configuration > Advanced Configuration > Video / Audio > Audio © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 57: Configuring Image Settings

    Steps: 1. Enter the Display Settings interface: Configuration > Basic Configuration> Image> Display Settings Or Configuration > Advanced Configuration> Image> Display Settings 2. Set the image parameters of the speed dome. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 58 This feature enhances the difference in color and light between parts of an image. The value ranges from 0 to 100. Saturation This feature is used to adjust color saturation of the image. The value ranges from 0 to 100. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 59: Focus Mode

    Figure 6-26 Manual Iris  Shutter Priority: The value of shutter needs to be adjusted manually. The iris and gain values will be adjusted automatically according to the brightness of the environment. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 60: Video Standard

    If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror. The flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER. Note: This function varies depending on the models of speed dome. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 61: Slow Shutter

    In Auto mode, the camera retains color balance automatically according to the current color temperature.  Manual White Balance: In MWB mode, you can adjust the color temperature manually to meet your own © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 62: Zoom Limit

    Auto: The brightness of the infrared light will be adjusted automatically. IR Light Sensitivity value ranges from 0 to 100.  Manual: you need to adjust the brightness value of infrared light manually. IR © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 63: Configuring Osd Settings

    Camera Name: Identifies the name of speed dome. You can customize the on screen display of time. Steps: 1. Enter the OSD Settings interface: Configuration > Advanced Configuration > Image > OSD Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 64 5. You can use the mouse to click and drag the text frame in the live view window to adjust the OSD position. Figure 6-36 Adjust OSD Location 6. Click to activate above settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 65: Configuring Text Overlay Settings

    These events can trigger the alarm actions, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc. For example, when an external alarm is triggered, the network speed dome sends a notification to an e-mail address. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 66: Configuring Motion Detection

    Note: You can draw up to 8 motion detection areas on the same image. (4) Click to finish drawing. Note: You can click to clear all of the areas. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 67 (Optional). (5) Click to save the settings. Note: The time of each period can’t be overlapped. Up to 4 periods can be configured for each day. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 68  Send Email Send an email with alarm information to a user or users when an event occurs. Note: To send the Email when an event occurs, you need to refer to Section © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 69: Configuring Video Loss Alarm

    Section 6.6.5 Configuring Alarm Output to set the alarm output parameters. 6.6.2 Configuring Video Loss Alarm Steps: 1. Enter the Video Loss Setting interface: Configuration > Advanced Configuration> Events > Video Loss Figure 6-42 Video Loss © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 70: Configuring Tamper-Proof Alarm

    You can configure the speed dome to trigger the alarm actions when the lens is covered. Steps: 1. Enter the Tamper-proof Settings interface: Configuration > Advanced Configuration > Events > Tamper-proof Figure 6-43 Tamper-proof Alarm © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 71: Configuring External Alarm Input

    2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed). 3. Edit the name in to set a name for the alarm input (optional). © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 72 6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox and select the No. to enable Preset Calling, Patrol Calling or Pattern Calling. 7. You can copy your settings to other alarm inputs. 8. Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 73: Configuring Alarm Output

    Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6.6.1 Configuring Motion Detection. 6. You can copy the settings to other alarm outputs. 7. Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 74: Handling Exception

    2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1 Configuring Motion Detection. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 75: Configuring Email Settings

    Please configure the DNS Server settings under Basic Configuration > Network > TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email function. Steps: 1. Enter the Email Settings interface: Configuration > Advanced Configuration > Events > Email © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 76 Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be configured. Receiver: The name of the user to be notified. Receiver’s Address: The email address of user to be notified. 3. Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 77: Configuring Snapshot Settings

    Please refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1 Configuring Motion Detection, or Step 4 Configuring External Alarm Input in Section 6.6.1 Configuring Motion Detection. 3) Check the Enable Event-triggered Snapshot checkbox. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 78 User Manual of Network Speed Dome Figure 6-49 Snapshot Settings © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 79: Chapter 7 Record Settings

    (2) If the status of the disk is Uninitialized as shown in Figure 7-2, check the corresponding checkbox to select the disk and click to start initializing the disk. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 80: Configuring Recording Schedule

    By default, the record files of scheduled recording are stored in the SD card (if supported) or in the network disk. Steps: 1. Enter the Record Schedule Settings interface: Configuration > Advanced Configuration> Storage > Record Schedule © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 81 The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min. Note: The Pre-record and Post-record parameters vary depending on the speed dome model. 4. Click to edit the record schedule. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 82 Step 1 Set the Motion Detection Area in the Section 6.6.1 Configuring Motion Detection.  Record Triggered by Alarm If you select Alarm, the video will be recorded when the alarm is triggered © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 83 You can also check any of the checkboxes before the date and click (4) Click to save the settings and exit the Edit Record Schedule © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 84 User Manual of Network Speed Dome interface. 6. Click to save the settings. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 85: Chapter 8 Playback

    Task 1: To play back the video files Steps: 1. Click on the menu bar to enter playback interface. Figure 8-1 Playback Interface 2. Select the date and click Figure 8-2 Search Video © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 86 You can also click to zoom out/in the progress bar. Figure 8-4 Set Playback Time Figure 8-5 Progress Bar The different colors of the video on the progress bar stand for the different video © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 87  You can click to stop the downloading.  The total number displays the amount of the video files.  The video files are not all listed on one page. You can click © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 88 User Manual of Network Speed Dome to turn pages. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 89: Chapter 9 Log Searching

    Minor Type, Start Time and End Time as shown in Figure 9-2. 3. Click to search log files. The matched log files will be displayed on the Log interface. Figure 9-2 Log Searching © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 90 User Manual of Network Speed Dome 4. To export the log files, click to save the log files in your computer. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 91: Chapter 10 Others

    Operator or User. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions for the new user. 4. Click to finish the user addition. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 92 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions. 4. Click to finish the user modification. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 93  Delete a User Steps: 1. Left-click the user name you want to delete and click 2. Click on the pop-up dialogue box to delete the user. Figure 10-4 Delete a User © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 94: Configuring Rtsp Authentication

    Version, Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number of Alarm Output are displayed. The information cannot be changed in this menu. It is the reference for maintenance or modification in future. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 95: Maintenance

    Figure 10-7 Reboot the Device 10.4.2 Restoring Default Settings Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 96: Importing/Exporting Configuration File

    Figure 10-9 Import/Export Configuration File 10.4.4 Upgrading the System Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 97 The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the speed dome during the process. The speed dome reboots automatically after upgrading. Figure 10-10 Remote Upgrade © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 98: Settings

    Parity and Flow Control is None. Note: The Baud Rate, PTZ Protocol and PTZ Address parameters of the speed dome should be exactly the same as those of the remote control device. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 99: Appendix

    You can also click to refresh the online device list manually. The newly searched devices will be added to the list. Note: You can click on each column heading to order the © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 100 Serial code is a series of characters combined by the start time and the serial number of the device. 2. Input the code in the Serial code field and click to restore the default password. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.

  • Page 101: Appendix 2 Port Mapping

     In the speed dome, the 8200~8210 ports change with the 8000 port with a constant value of 200. E.g. if the 8000 port is changed to 8005, then the 8200~8210 ports should be changed to 8205~8215. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 102 The port of the network speed dome cannot conflict with other ports. For example, some web management port of the router is 80. Change the speed dome port if it is the same as the management port. © Hikvision Digital Technology Co., Ltd. All Rights Reserved.
  • Page 103 First Choice for Security Professionals...

Table of Contents