User Manual of Network Speed Dome
Configuration> Advanced Configuration> Security > Authentication
2. Set the authentication mode for each authentication type.
RTSP Authentication: Select the authentication mode as basic or disable in
the dropdown list to enable or disable the RTSP authentication.
WEB Authentication: Select the authentication mode as basic or digest in
the dropdown list.
3. Click
10.3 Configuring Anonymous Visit
When you enable this function, you can log into the camera without a username and
password.
In login interface, check the Anonymous checkbox and click Login to enter the
camera as shown in Figure 10-6.
10.4 Configuring IP Address Filter
With this function on, the camera allows certain IP addresses whether to log in or
not.
Filter Type
Forbidden
© Hikvision
Figure 10-4 RTSP Authentication
to save the settings.
Figure 10-5 Anonymous Login
Figure 10-6 Login Interface
Description
Forbid the IP addresses added in the IP Address
Filter interface to log in.
109