HIKVISION Network Speed Dome User Manual page 54

User Manual of Network Speed Dome
the LAN. When devices connect to this network with IEEE 802.1X standard, the
authentication is needed. If the authentication fails, the devices don't connect to the
network.
The protected LAN with 802.1X standard is shown as follows:
Speed Dome
Before connecting the Network Camera to the protected LAN, please apply a

digital certificate from a Certificate Authority.
The network camera requests access to the protected LAN via the

authenticator (a switch).
The switch forwards the identity and password to the authentication server

(RADIUS server).
The switch forwards the certificate of authentication server to the network

camera.
If all the information is validated, the switch allows the network access to

the protected network.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X Settings interface:
Configuration > Advanced Configuration > Network > 802.1X
© Hikvision
Internet
PC PC
Figure 6-16 Protected LAN
Figure 6-17 802.1X Settings
Authenticator
Network Switch
Authentication
Server
RADIUS Server
53