Configuring Text Overlay Settings; Configuring And Handling Alarms - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome

6.5.3 Configuring Text Overlay Settings

Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay Settings interface:
Configuration > Advanced Configuration > Image > Text Overlay
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to click and drag the red text frame
window to adjust the text overlay position.
5. Click .
There are up to 8 text overlays configurable.

6.6 Configuring and Handling Alarms

Purpose:
This section explains how to configure the network speed dome to respond to alarm
events, including motion detection, external alarm input, video loss, tamper-proof
and exception. These events can trigger the alarm actions, such as Notify
Surveillance Center, Send Email, Trigger Alarm Output, etc.
For example, when an external alarm is triggered, the network speed dome sends a
notification to an e-mail address.
© Hikvision
Figure 6-44 Text Overlay Settings
74
in the live view