HIKVISION Network Speed Dome User Manual page 102

User Manual of Network Speed Dome
2) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.

Upload event-triggered snapshots to FTP
Steps:
1) Check the Enable Event-triggered Snapshot checkbox.
2) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
3) Check
interface. Please refer to Step 3 in Section 6.6.1 Configuring Motion Detection.
© Hikvision
checkbox in Motion Detection Settings or Alarm Input
101
checkbox in FTP
checkbox in FTP