Port Mapping; Set Auto Port Mapping; Set Manual Port Mapping - HIKVISION DS-2TD4668-35A4/W User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual

12.6 Port Mapping

By setting port mapping, you can access devices through the specified port.
Before You Start
When the ports in the device are the same as those of other devices in the network, refer to Port
to modify the device ports.
Steps
1. Go to Configuration → Network → Basic Settings → NAT .
2. Select the port mapping mode.
Auto Port Mapping
Manual Port Mapping Refer to Set Manual Port Mapping for detailed information.
3. Click Save.

12.6.1 Set Auto Port Mapping

Steps
1. Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default
name.
2. Select the port mapping mode to Auto.
3. Click Save.
Note
UPnP™ function on the router should be enabled at the same time.

12.6.2 Set Manual Port Mapping

Steps
1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default
name.
2. Select the port mapping mode to Manual, and set the external port to be the same as the
internal port.
3. Click Save.
What to do next
Go to the router port mapping settings interface and set the port number and IP address to be the
same as those on the device. For more information, refer to the router user manual.
Refer to Set Auto Port Mapping for detailed information.
78