User Manual of Network Speed Dome
(1) Enter the DST interface by Configuration > Advanced Configuration >
System > DST
(2) Check
(3) Set the date of the DST period.
(4) Click
6.3 Configuring Network Settings
6.3.1 Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the speed dome
over network. IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
© Hikvision
to enable the DST function.
to save the settings.
Figure 6-6 DST Settings
46