HIKVISION Network Speed Dome User Manual page 30

User Manual of Network Speed Dome
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click to save all the patrol settings.
 Calling a Patrol:
In the PTZ control panel, select a defined patrol from
call the patrol, as shown in Figure 4-9.
 Buttons on the Patrols interface:
Buttons
© Hikvision
Description
It is the duration staying on one patrol point. The speed
dome moves to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
Figure 4-9 Calling a Patrol
Description
Save a patrol
Call a patrol
Stop a patrol
Enter the adding interface of preset
Modify a preset
Delete a preset
Delete all the presets in the selected patrol
29
and click to