HIKVISION Network Speed Dome User Manual page 117

User Manual of Network Speed Dome
You can click
you can click
on the right side, or click
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of
the device will be displayed in the Modify Network Parameters panel on the
right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and
click to save the changes.

Restore default password
Steps:
1. Contact our technical engineers to get the serial code.
Serial code is a series of characters combined by the start time and the serial
number of the device.
2. Input the code in the Serial code field and click
password.
© Hikvision
or on each column heading to order the information;
to expand the device table and hide the network parameter panel
to show the network parameter panel.
Figure A.1.2 Modify Network Parameters
116
to restore the default