User Manual of Network Speed Dome
6.6.1 Configuring Motion Detection
Purpose:
Motion detection is a feature which can trigger alarm actions and actions of
recording videos when the motion occurred in the surveillance scene.
Steps:
1. Enter the motion detection setting interface:
Configuration > Advanced Configuration> Basic Event > Motion Detection
2. Check the checkbox of the Enable Motion Detection to enable this function.
You can check the Enable Dynamic Analysis for Motion checkbox if you want the
detected object get marked with rectangle in the live view.
3. Select the configuration mode as Normal or Expert and set the corresponding
motion detection parameters.
Normal
Figure 6-45 Motion Detection Settings-Normal
Steps:
(1)
. Click and drag the mouse on the live video image to draw a
motion detection area.
(2) Click
•
You can draw up to 8 motion detection areas on the same image.
•
You can click
(3) Move the slider
detection.
© Hikvision
to finish drawing.
to clear all of the areas.
to set the sensitivity of the
75