Setting / Calling A Pattern - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome

4.5.4 Setting / Calling a Pattern

Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be
called on the pattern settings interface. There are up to 4 patterns for customizing.
 Setting a Pattern:
Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-10.
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of Program Pattern Remaining Memory (%) is displayed on the
screen.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
5. Click to save all the pattern settings.
 Buttons on the Patterns interface:
Buttons
These 4 patterns can be operated separately and with no priority level.

© Hikvision
to enter the pattern settings interface.
Figure 4-10 Patterns Settings Interface
Description
Start to record a pattern.
Stop recording a pattern.
Call the current pattern.
Stop the current pattern.
Delete the current pattern.
30