Chapter 4 Live View; Power-Up Action; Live View Page - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome
In this and the following chapters, operation of the speed dome by the web browser
R will be taken as an example.

4.1 Power-up Action

After the power is applied, the speed dome will perform self-test actions. It begins
with lens actions and then pan and tilt movement. After the power-up self-test
actions, the information as shown in Figure 4-1 will be displayed on screen for 40
seconds.
The System Information displayed on the screen includes the dome model, address,
protocol, version and other information. The COMMUNICATION refers to the baud
rate, parity, data bit and stop bit of the dome. e.g., "2400, N, 8, 1" indicates the
dome is configured with the baud rate of 2400, no parity, 8 data bits and 1 stop bit.

4.2 Live View Page

Purpose:
The live video page allows you to view live video, capture images, realize PTZ control,
set/call presets and configure video parameters.
Log in the network speed dome to enter the live view page, or you can click
on the menu bar of the main page to enter the live view page.
© Hikvision

Chapter 4 Live View

Model
Address
Communication
Software Version
Camera Version
Language
Figure 4-1 Power-up Information
XX-XXXXXX-X
0
0000,0,0,0
Vx.x.x
Vx.xx
English
21