Handling Exception - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome
6. You can copy the settings to other alarm outputs.
7. Click

6.6.6 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 in Section 6.6.1 Configuring Motion Detection.
3. Click
© Hikvision
Figure 6-54 Alarm Output Settings
to save the settings.
Figure 6-55 Exception Settings
to save the settings.
83