Setting / Calling A Preset - HIKVISION Network Speed Dome User Manual

User Manual of Network Speed Dome
Button

4.5.2 Setting / Calling a Preset

Purpose:
A preset is a predefined image position. For the defined preset, you can click the
calling button to quickly view the desired image position.
 Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
Pan the speed dome to the right or left.

Tilt the speed dome up or down.

Zoom in or out.

Refocus the lens.

3. Click to finish the setting of the current preset.
4. You can click
You can configure up to 300 presets.
© Hikvision
Table 4-2 Descriptions of PTZ Control Panel
Adjust speed of pan/tilt movements
Figure 4-5 Setting a Preset
to delete the preset.
Description
Zoom in/out
Focus near/far
Iris +/-
26