User Manual of E Series Network Speed Dome
10.2 Configuring Authentication Security
Purpose:
You can specifically secure the stream data of live view.
Steps:
1. Enter the Authentication interface:
Configuration> Advanced Configuration> Security > Authentication
2.
Set the authentication mode for each authentication type.
RTSP Authentication: Select the authentication mode as basic or disable in the
dropdown list to enable or disable the RTSP authentication.
WEB Authentication: Select the authentication mode as basic or digest in the
dropdown list.
3. Click
to save the settings.
10.3 Configuring Anonymous Visit
When you enable this function, you can log into the camera without a username and password.
In login interface, check the Anonymous checkbox and click Login to enter the camera as shown
in Figure 10-7.
10.4 Configuring IP Address Filter
With this function on, the camera allows certain IP addresses whether to log in or not.
© Hikvision
Figure 10-5 Authentication
Figure 10-6 Anonymous Login
Figure 10-7 Login Interface
83