Defining Idle Session Timeout - Cisco 220 Series Smart Plus Administration Manual

Administration: General Information

Defining Idle Session Timeout

STEP 3
Defining Idle Session Timeout
STEP 1
STEP 2
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
upper-right corner of any window to preserve current configuration across the
boot process. (If the Save option is not displayed, the Running Configuration
matches the Startup Configuration and no action is necessary.)
Or check Enable beside the Reboot to Factory Defaults field and click Reboot to
reboot the switch by using factory default configuration. This process erases the
Startup Configuration file; any settings that are not saved to another file are
cleared when this action is selected.
The Mirror Configuration is not deleted when restoring to factory defaults.
Use the Idle Session Timeout page to configure the time intervals that the
management sessions can remain idle before they timeout and the user must login
again to reestablish one of the following sessions:
• HTTP session
• HTTPS session
• Console session
• Telnet session
• SSH session
To define the idle session timeout for various types of sessions:
Click Administration > Idle Session Timeout.
Select the timeout for the session from the corresponding drop-down menu. The
default value is 10 minutes.
Click Apply. The idle session timeout settings are defined, and the Running
Configuration is updated.
5
62