Window Navigation; Application Header - Cisco 220 Series Smart Plus Administration Manual

Getting Started

Window Navigation

Window Navigation
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
- Tunnel —These are displayed as Tunnel.
• Interface Number—Port, LAG, tunnel, or VLAN ID.
This section describes the features of the web-based interface.

Application Header

Application Header
The Application Header appears on every page. It provides the following
application links:
Application Link
Name
Save
Username
Description
A flashing red X icon displayed to the left of the Save
application link indicates that Running Configuration
changes have been made have not yet been saved to
the Startup Configuration file. The flashing of the red X
can be disabled on the Copy/Save Configuration page.
Click Save to display the Copy/Save Configuration
page. Save the Running Configuration file by copying it
to the Startup Configuration file type on the switch.
After this save, the red X icon and the Save application
link are no longer displayed. When the switch is
rebooted, it copies the Startup Configuration to the
Running Configuration and sets the switch parameters
according to the data in the Running Configuration.
Displays the name of the user logged on to the switch.
The default username is cisco. (The default password
is cisco)
1
14